Trojan ECM Em Rex Cover - Monitored

Stock Code:
57293
POA

Description

Cover for use with the Em Rex Unit

The Em Rex Cover is to be used with the Em Rex unit to deter unintended / malicious activation of the unit when it is installed in a public area. The device is passive and has no electronics that could fail and cause the unit not to operate. The cover has two sets of outputs, which are used to monitor the operation of the cover being lifted.

One set of contacts connects to the piezo (buzzer) on the Em Rex unit and the second to the Access Control System for monitoring.
The cover is designed to clip into place when closed so as to make the operation of it a deliberate action as it will not lift without reasonable force. This will prevent any accidental or unintended operation of it.

The Em Rex Unit fits into the base of the cover before both parts are fixed to the wall, preventing it being removed without unscrewing it from the wall.

Features
* Designed to complement the Em Rex unit and comply with building codes for emergency egress
* Cover is made of polycarbonate to withstand long term operation without any deterioration.
* Two built in reed switches that cannot be accessed or compromised.
* Unit is weather proof. It can be located in external locations provided the unit is sealed against the wall.
* Minimal moving parts.
* Text and graphics are protected by a Lexan overlay (easy to clean and fade resistant)

Specifications
* The unit is 92mm x 153mm and fits a standard electrical flush box
* Switching voltage max is 30 dc
* Switching current max is 200 mA
* There is one set of N/O contacts for connection to the Em Rex Piezo (two wires)
* A second set of N/C contacts for connection to the Access Control System (connector)
* Please note: the contacts stated above, are when the cover is in the closed position.

See specification sheet below.
Please sign in to your SWL account to access installer manual.

Stock Level:
In Stock